Description
Introduction
The EW-S1710CFU-AP series is a 10/100M unmanaged PoE switch. It has 8*10/100M PoE ports and 2*10/100M uplink RJ45 ports. Port 1-8 can support IEEE 802.3af/at standard PoE power supply, and single port PoE power reaches 30W. The maximum PoE output power is 96W. As a PoE power supply device, it can automatically detect and recognize the power receiving equipment that meets the standard and supply power through the network cable. It can supply power to POE terminal equipment such as wireless AP, webcam, VoIP, visual intelligent building intercom through network cable, and meet the network environment that needs high-density PoE power supply. It is suitable for hotel, campus, factory dormitory and small and medium-sized enterprises. Features:
1, 8*10/100M + 2*100M RJ45 Port PoE Switch,1-8 ports support af/at;
Comply with IEEE 802.3, IEEE 802.3u standards;
2, PoE port support AF/AT intelligent recognition. Standard power is 15.4W/port, Maximum power: 30W/port;
3, With a DIP switch, the second gear is used independently, no need to restart the power supply, and can be enabled with the dial, all ports support the port AI watchdog function by default, 7×24 detection port access device status, there is a state of crash or fake crash , the POE power supply of the port will be restarted, the fault will be cleared automatically, and the manual maintenance cost will be avoided.
1, E:1-8 port, Extend 300meters transmission with limit 10Mbps.
2, V:1-8 Port support each port Isolation & VLAN;
4, Supports POE devices such as wireless access points (APs) and network surveillance cameras through Category 5/6 Ethernet cables;
5, The Power supply is 96W; Product parameters:
Brand: EWIND
Switching Capacity: 2.0Gbps
Forwarding Mode: 1.488Mpps
MAC: 4K
Buffer Memory: 1.25M
Power Supply Pin: Default 1/2(+), 3/6(-)
MAX / AVERAGE Power Per Port: 30W/15.4W
The EW-S1710CFU-AP series is a 10/100M unmanaged PoE switch. It has 8*10/100M PoE ports and 2*10/100M uplink RJ45 ports. Port 1-8 can support IEEE 802.3af/at standard PoE power supply, and single port PoE power reaches 30W. The maximum PoE output power is 96W. As a PoE power supply device, it can automatically detect and recognize the power receiving equipment that meets the standard and supply power through the network cable. It can supply power to POE terminal equipment such as wireless AP, webcam, VoIP, visual intelligent building intercom through network cable, and meet the network environment that needs high-density PoE power supply. It is suitable for hotel, campus, factory dormitory and small and medium-sized enterprises. Features:
1, 8*10/100M + 2*100M RJ45 Port PoE Switch,1-8 ports support af/at;
Comply with IEEE 802.3, IEEE 802.3u standards;
2, PoE port support AF/AT intelligent recognition. Standard power is 15.4W/port, Maximum power: 30W/port;
3, With a DIP switch, the second gear is used independently, no need to restart the power supply, and can be enabled with the dial, all ports support the port AI watchdog function by default, 7×24 detection port access device status, there is a state of crash or fake crash , the POE power supply of the port will be restarted, the fault will be cleared automatically, and the manual maintenance cost will be avoided.
1, E:1-8 port, Extend 300meters transmission with limit 10Mbps.
2, V:1-8 Port support each port Isolation & VLAN;
4, Supports POE devices such as wireless access points (APs) and network surveillance cameras through Category 5/6 Ethernet cables;
5, The Power supply is 96W; Product parameters:
Brand: EWIND
Switching Capacity: 2.0Gbps
Forwarding Mode: 1.488Mpps
MAC: 4K
Buffer Memory: 1.25M
Power Supply Pin: Default 1/2(+), 3/6(-)
MAX / AVERAGE Power Per Port: 30W/15.4W
Total PWR / Input Voltage: 96W
Power Consumption Standby: <4W;Full load:<96W
Reviews
There are no reviews yet.